1. 毕业设计（论文）的内容和要求
(I) Design basis1. Project OverviewThis project is a practical application project design of a library in Nanjing, Jiangsu. The single-story building area is about 1956.78m2, the main body is five spans and five floors, and the building area is about 9783.9m2. The main design scheme is a multi-layer reinforced concrete frame structure with a design life of 50 years. The general plan of the project and the layout of the standard layer column network are shown in the attached drawing.2. Meteorological dataBasic wind pressure: 0.50kN / m2Basic snow pressure: 0.40 kN / m23. Engineering geological data(1) The geotechnical proposed that the site is flat, with miscellaneous fill on the surface and silty clay and clay below; there is no distribution of liquefied soil layer, and the buried depth of stable groundwater level is 1.65 - 2.14 m, which is not corrosive to reinforced concrete. It is proposed to adopt reinforced concrete independent foundation under the column.(2) Foundation form: According to the engineering geological characteristics of the site and the structural load characteristics of the proposed building, it is recommended to adopt reinforced concrete independent foundation under the column, with the layer ○2of loose clay as the bearing layer.(3) See the information in this assignment for detailed exploration. 4. Structure and site seismic effects(1) The project is a multi-storey frame structure, and the safety level of the building structure is level-II.(2) The seismic-resistant defense intensity of the proposed site is 7 degrees, the design basic seismic acceleration value is 0.10g, and the design earthquake group is the first group.(3) Class II project site. (4) According to the code of "Classification standard for seismic protection of building engineering", the project is a class-C building. 5. Load Value Adopted according to "Building Structure Load Code" GB5009-2001.6. Construction technical conditions: This project was undertaken by a construction engineering company with complete equipment and good technology.7. Material supply: Three materials and general materials can be supplied in a timely manner as planned.8. Water and electricity supply: guaranteed by the construction unit.(2) Design content and requirementsAccording to the general plan and design requirements provided, complete the main architectural design, upper frame structure and foundation calculation, component design, joint structure design, construction drawing and other work.Specific requirements are as follows:1.Architectural partAccording to the provided general floor plan and standard layer column network layout drawing, carry out building design and complete the corresponding building construction drawing.2.Structural partThe structural layout is carried out, and the cross-sectional size of the component and the material strength level are selected. Design and calculation of main structures and components, including a cross-frame, beam-column section design, cast-in-situ floor panels, stair design, stairwell, and foundation design. Draw construction drawings and prepare structural design calculation instructions.3.Construction organization designThe design of construction organization should include: project overview; management organization; construction plan and technical measures; construction schedule (horizontal diagram); construction preparations; quality assurance measures; safe and civilized construction measures; construction layout.4.Foreign language translationTranslate foreign materials with not less than 10,000 printed symbols. The original and translated foreign language are used as necessary attachments for the graduation design, which are bound into separate volumes and submitted as graduation design materials together with other achievements.
2. 参考文献
[1] Su J01-2005. Construction instructions [S].[2] Su J9503-J04-2005. Roof building structure, balcony, stairs, bathroom, sink [S].[3] Su J9508. Outdoor Engineering [S].[4] Su J05-2005. Stairs [S].[5] Su J11-2006. Aluminum alloy doors and windows [S].[6] Su J09-2005. Lightweight partition wall, wall body, floor deformation joint [S].[7] Architectural Design Data Collection Editorial Committee. Architectural Design Data Collection (8) Second Edition [M]. Beijing: China Construction Industry Press, 1996.[8] Architectural Design Data Collection Editorial Committee. Architectural Design Data Collection (9) Second Edition [M]. Beijing: China Construction Industry Press, 1997.[9] Edited by Editorial Committee of Architectural and Structural Data Collection. Architectural and Structural Data Collection (Upper and Lower) Second Edition [M]. Beijing: China Construction Industry Press, 2009.[10] GB50009-2001. Building Structure Load Specification [S].[11] GB50010-2010. Code for design of concrete structures [S].[12] GB50011-2010. Code for seismic design of buildings [S].[13] GB50003-2011. Code for design of masonry structures [S].[14] GB50007-2002. Code for design of building foundation [S].[15] 03G101-1. The overall representation method of the concrete structure construction drawing. Drafting rules and structural details [S].[16] Architectural data set (upper and lower) [Z]. Beijing: China Construction Industry Press.[17] Edited by Xu Xiuli. Design of concrete frame structure [M]. Beijing: China Construction Industry Press. 2008.8.[18] Liang Xingwen, editor of Shi Qingxuan. Guidance for graduation design of civil engineering specialty [M]. Beijing: Science Press, 2005.[19] Dong Jun, Zhang Weiyu, Gu Jianping. Graduation Design Guide for Civil Engineering Specialty-Building Construction Volume [M]. Beijing: China Water Resources and Hydropower Press, March 2002[20] Edited by Zhou Guoxing, Guide to Graduation Design of Housing Structures [M]. China Construction Industry Press, 2004.[21] Li Hongnan, Cui Xiguang, Zou Chaoying, etc. Structural design of multi-storey and high-rise buildings [M]. Beijing: China Construction Industry Press, 1998.[22] Zhang Weibin, chief editor. Doubts and engineering examples of multistory and high-rise reinforced concrete structure design [M]. Beijing: China Construction Industry Press, 2005.
以上是毕业论文任务书，课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找。
