1. 毕业设计（论文）的内容和要求
本课题研究脱硫促进剂对废旧丁腈胶粉应力诱导脱硫反应效果的规律性影响。
通过设计实验方案与工艺参数，利用亚临界流体状态下双螺杆挤出机熔融挤出法制备废旧丁腈胶粉脱硫后的高分子材料，拉条造粒后，检测与表征脱硫后材料的各项指标。
在此基础上，研究多种脱硫促进剂、膨润剂等助剂对脱硫效果的影响，进而为废旧丁腈胶粉脱硫资源再循环利用的工业应用方法提供指导。
2. 参考文献
毕设期间要进行研究现状调查与总结，要求在开题报告及毕业设计（论文）中涉及的中文与英文文献数量不少于学校相关文件要求。
以下是与本课题相关的部分文献列表：[1]司虎,丁骋,史长平等.轮胎胶高剪切应力诱导脱硫反应的影响因素研究[J].南京工业大学学报(自然科学版),2008,30(01):69-73.[2]史长平,怀乐,王小军等.复合促进剂对高剪切应力诱导轮胎胶脱硫反应的影响[J].高分子材料科学与工程,2002,28(11):105-112.[3]张芒,陈天举,张云灿.轮胎胶应力诱导脱硫及再硫化材料的力学性能[J].南京工业大学学报:自然科学版,2009,31(3):74-80.[4]朱信明,辛振祥,卢灿辉.再生橡胶-原理技术应用[M],北京:化学工业出版社,2016．[5]Jushik Yun, A.I.Isayev. Blends of Ultrasonically Devulcanized and Virgin Carbon Black Filled EthylenePropyleneDiene Monomer Rubbers[J]. Journal of Applied Polymer Science,2004,92:132138.[6]Sang Eun Shim, A.I.Isayev. Effects of the Presence of Water on Ultrasonic Devulcanization of Polydimethyl-siloxane [J]. Journal of Applied Polymer Science,2003,88:26302638.[7]Sayata Ghose, A.I.Isayev. Recycling of Unfilled Polyurethane Rubber Using High-Power Ultrasound[J]. Journal of Applied Polymer Science,2003,88:980989.[8]Maridass Balasubramanian. Cure modeling and mechanical properties of counter rotating twin screw extruder devulcanized ground rubber tire-natural rubber blends[J]. J Polym Res,2009,16:133141.[9]Shuyan Li, Johanna Lamminmaki, Kalle Hanhi. Effect of Ground Rubber Powder and Devulcanizates on the Properties of Natural Rubber Compounds[J]. Journal of Applied Polymer Science,2005,97:208217.[10]Sandip Rooj， Ganesh C.Basak， Pradip K. Maji，et al. New Route for Devulcanization of Natural Rubber and the Properties of Devulcanized Rubber[J]. J Polym Environ,2011,19:382390.[11]G.K.Jana，C.K.Das. Recycling Natural Rubber Vulcanizates through Mechanochemical Devulcanization [J]. Macromolecular Research,2005，13（1）：30-38.[12]Pipat Thaicharoen, Patchanita Thamyongkit, Sirilux Poompradub. Thiosalicylic acid as a devulcanizing agent for mechano-chemical devulcanization[J]. Korean J. Chem. Eng., 2010,27(4)：1177-1183.[13]Hu Si, Tianju Chen, Yuncan Zhang. Effects of High Shear Stress on the Devulcanization of Ground Tire Rubber in a Twin-Screw Extruder[J]. J. Appl. Polym. Sci.,2013,128:23072318.[14]Xiaojun Wang, Changping Shi, Ling Zhang,et al. Effects of Shear Stress and Subcritical Water on Devulcanization of StyreneButadiene Rubber Based Ground Tire Rubber in a Twin-Screw Extruder[J]. J. Appl. Polym. Sci.,2013,130:18451854.[15]沈韦韦,武懿嘉,张云灿.亚临界流体挤出法对天然橡胶基轮胎胶粉脱硫化反应的影响[J].合成橡胶工业,2015,38(3):226-232.[16]武懿嘉,沈韦韦,张云灿.亚临界流体与高剪切应力对EPDM废胶粉脱硫反应的影响[J].高分子材料科学与工程,2015,32(1):119-129.[17]李玉华,孔维荣,张玲等.亚临界水挤出法制备ＡＢＳ／木粉复合材料力学性能研究[J].中国塑料,2015,29(1):42-47.[18]G.K.Jana, C.K.Das. Recycling Natural Rubber Vulcanizates through Mechanochemical Devulcanization[J]. Macromolecular Research,2005,13(1):30-38.
以上是毕业论文任务书，课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找。
