全文总字数：4936字
1. 毕业设计（论文）的内容和要求
（1）查找相关资料及文献，熟悉和掌握电火花线切割机床特点及控制系统；（2）熟悉电火花线切割加工设备，制定线切割加工设备设计方案；（3）根据工艺需要，开展电火花线切割机床和控制系统的设计；（4）写毕业设计报告、完成机械图纸设计及英文翻译。
2. 实验内容和要求
（1）查找相关资料及文献，熟悉和掌握电火花线切割加工方法；（2）熟悉电火花-电解复合加工设备，制定电火花线切割加工设备设计方案；（3）根据工艺需要，开展电火花线切割加工机床和控制系统；（4）写毕业设计报告、完成机械图纸设计及英文翻译。
3. 参考文献
Caggiano, Alessandra, Roberto Perez, Tiziana Segreto, Roberto Teti, and Paul Xirouchakis. "Advanced Sensor Signal Feature Extraction and Pattern Recognition for Wire Edm Process Monitoring." Procedia CIRP 42 (// 2016): 34-39. http://dx.doi.org/http://dx.doi.org/10.1016/j.procir.2016.02.181.Cheng, X., K. Nakamoto, M. Sugai, S. Matsumoto, Z. G. Wang, and K. Yamazaki. "Development of Ultra-Precision Machining System with Unique Wire Edm Tool Fabrication System for Micro/Nano-Machining." CIRP Annals - Manufacturing Technology 57, no. 1 (// 2008): 415-20. http://dx.doi.org/http://dx.doi.org/10.1016/j.cirp.2008.03.137.Conde, A., J. A. Sanchez, S. Plaza, M. Ostolaza, I. de la Puerta, and Z. Li. "Experimental Measurement of Wire-Lag Effect and Its Relation with Signal Classification on Wire Edm." Procedia CIRP 68 (2018/01/01/ 2018): 132-37. http://dx.doi.org/https://doi.org/10.1016/j.procir.2017.12.035.Ebisu, Tomonori, Akiyoshi Kawata, Yasuhiro Okamoto, Akira Okada, and Haruya Kurihara. "Influence of Jet Flushing on Corner Shape Accuracy in Wire Edm." Procedia CIRP 68 (2018/01/01/ 2018): 104-08. http://dx.doi.org/https://doi.org/10.1016/j.procir.2017.12.031.Haas, P., P. Pontelandolfo, and R. Perez. "Particle Hydrodynamics of the Electrical Discharge Machining Process. Part 1: Physical Considerations and Wire Edm Process Improvement." Procedia CIRP 6, no. 0 (// 2013): 41-46. http://dx.doi.org/http://dx.doi.org/10.1016/j.procir.2013.03.006.Han, Fuzhu, Jie Zhang, and Isago Soichiro. "Corner Error Simulation of Rough Cutting in Wire Edm." Precision Engineering 31, no. 4 (10// 2007): 331-36. http://dx.doi.org/http://dx.doi.org/10.1016/j.precisioneng.2007.01.005.Huang, Guangwei, Weiwen Xia, Ling Qin, and Wansheng Zhao. "Online Workpiece Height Estimation for Reciprocated Traveling Wire Edm Based on Support Vector Machine." Procedia CIRP 68 (2018/01/01/ 2018): 126-31. http://dx.doi.org/https://doi.org/10.1016/j.procir.2017.12.034.Kamei, Takuya, Akira Okada, and Yasuhiro Okamoto. "High-Speed Observation of Thin Wire Movement in Fine Wire Edm." Procedia CIRP 42 (// 2016): 596-600. http://dx.doi.org/http://dx.doi.org/10.1016/j.procir.2016.02.266.Kimura, A., Y. Okamoto, A. Okada, J. Ohya, and T. Yamauchi. "Fundamental Study on Multi-Wire Edm Slicing of Sic by Wire Electrode with Track-Shaped Section." Procedia CIRP 6, no. 0 (// 2013): 232-37. http://dx.doi.org/http://dx.doi.org/10.1016/j.procir.2013.03.052.Kuruvila, Nixon and H. V. Ravindra. "Parametric Influence and Optimization of Wire Edm of Hot Die Steel." Machining Science and Technology 15, no. 1 (2011 2011): 47-75. http://dx.doi.org/10.1080/10910344.2011.557966.Okada, A., T. Konishi, Y. Okamoto, and H. Kurihara. "Wire Breakage and Deflection Caused by Nozzle Jet Flushing in Wire Edm." CIRP Annals - Manufacturing Technology 64, no. 1 (// 2015): 233-36. http://dx.doi.org/http://dx.doi.org/10.1016/j.cirp.2015.04.034.Okada, A., Y. Uno, M. Nakazawa, and T. Yamauchi. "Evaluations of Spark Distribution and Wire Vibration in Wire Edm by High-Speed Observation." CIRP Annals - Manufacturing Technology 59, no. 1 (// 2010): 231-34. http://dx.doi.org/http://dx.doi.org/10.1016/j.cirp.2010.03.073.Okada, A., Y. Uno, S. Onoda, and S. Habib. "Computational Fluid Dynamics Analysis of Working Fluid Flow and Debris Movement in Wire Edmed Kerf." CIRP Annals - Manufacturing Technology 58, no. 1 (// 2009): 209-12. http://dx.doi.org/http://dx.doi.org/10.1016/j.cirp.2009.03.003.Rupajati, Pathya, Bobby O. P. Soepangkat, Bambang Pramujati, and H. C. Kis Agustin. "Optimization of Recast Layer Thickness and Surface Roughness in the Wire Edm Process of Aisi H13 Tool Steel Using Taguchi and Fuzzy Logic." In Advances in Applied Mechanics and Materials, edited by B. Pramujati, vol 493, Applied Mechanics and Materials, 529-34, 2014.Srinivasa Rao, Pujari, Koona Ramji, and Beela Satyanarayana. "Effect of Wire Edm Conditions on Generation of Residual Stresses in Machining of Aluminum 2014 T6 Alloy." Alexandria Engineering Journal 55, no. 2 (6// 2016): 1077-84. http://dx.doi.org/http://dx.doi.org/10.1016/j.aej.2016.03.014.Tosun, N., C. Cogun, and H. Pihtili. "The Effect of Cutting Parameters on Wire Crater Sizes in Wire Edm." International Journal of Advanced Manufacturing Technology 21, no. 10-11 (Jul 2003): 857-65. http://dx.doi.org/10.1007/s00170-002-1404-1.
4. 毕业设计（论文）计划
1、20120.12.20-2020.12.29: 查阅文献，熟悉课题背景，做好开题前期工作。
2、2020.12.29-2021.2.13: 在广泛查阅资料的基础上，完成外文翻译、文献综述和开题报告等工作。
3、2021.2.13-2021.4.12: 进行课题的机床图纸绘制等。
以上是毕业论文任务书，课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找。
