全文总字数：4583字
1. 毕业设计（论文）的内容和要求
1. 文献综述：主要针对近五年国内外关于重金属转化的文献进行查阅，总结，注意他人的研究方法、实验和模拟设计思路、所用表征手段、结果讨论的重点，进而对自己的课题有所启发。
文献总量不少于40篇，英文不少于25篇。
2. 完成不少于3000汉字的外文文献翻译。
2. 实验内容和要求
1. 根据文献研究，初步形成自己的实验方案。
2. 熟悉模拟软件和实验室的焚烧热解实验装置，拥有独立实验及结果处理的能力。
3. 明白所用表征方法的基本原理，学会实验数据处理方法及分析讨论的重点。
3. 参考文献
1. He, P. J., H. Zhang, C. G. Zhang and D. J. Lee (2004). "Characteristics of air pollution control residues of MSW incineration plant in Shanghai." Journal of Hazardous Materials 116(3): 229-237.2. Li, G., Q. Wu, S. Wang, Z. Li, H. Liang, Y. Tang, M. Zhao, L. Chen, K. Liu and F. Wang (2017). "The influence of flue gas components and activated carbon injection on mercury capture of municipal solid waste incineration in China." Chemical Engineering Journal 326: 561-569.3. Liu, C., Y. Huang, X. Wang, S. Zhang, W. Xia, C. Sun and H. Liu (2017). "Dynamic experimental investigation on the volatilization behavior of lead and cadmium in the simulated municipal solid waste (MSW) influenced by sulfur compounds during incineration." Energy and Fuels 31(1): 847-853.4. Liu, C., Y. Huang, X. Wang, Z. Zhu, M. Yu, C. Bu and J. Zhang (2021). "Interactions of PbCl2 capture and CdCl2 capture by kaolin in the high-temperature PbCl2-CdCl2-Kaolin reaction system." Fuel 286.5. Wang, S.-J., H. Zhang, L.-M. Shao, S.-M. Liu and P.-J. He (2014). "Thermochemical reaction mechanism of lead oxide with poly(vinyl chloride) in waste thermal treatment."117: 353-359.6. Wang, S. J., P. J. He, W. T. Lu, L. M. Shao and H. Zhang (2017). "Comparison of Pb, Cd, Zn, and Cu chlorination during pyrolysis and incineration." Fuel 194: 257-265.7. Wang, X., Y. Huang, C. Liu, S. Zhang, Y. Wang and G. Piao (2017). "Dynamic volatilization behavior of Pb and Cd during fixed bed waste incineration: Effect of chlorine and calcium oxide." Fuel 192: 1-9.8. Wang, X., Y. Huang, Z. Zhong, Y. Yan, M. Niu and Y. Wang (2014). "Control of inhalable particulate lead emission from incinerator using kaolin in two addition modes." Fuel Processing Technology 119: 228-235.9. Wang, X., H. Xie, R. Du, Y. Liu, P. Lin, J. Zhang, C. Bu, Y. Huang and W. Zhang (2018). "High-temperature chlorination of PbO and CdO induced by interaction with NaCl and Si/Al matrix." RSC Advances 8(60): 34449-34458.10. Yu, S., H. Zhang, F. L, L. Shao and P. He (2021). "Flow analysis of major and trace elements in residues from large-scale sewage sludge incineration." Journal of Environmental Sciences (China) 102: 99-109.11. Zhang, H., P. J. He and L. M. Shao (2002). "Fate of heavy metals during municipal solid waste incineration." Waste Management and Research 20(1): 55-68.12. Zhang, H., P. J. He and L. M. Shao (2008). "Fate of heavy metals during municipal solid waste incineration in Shanghai." Journal of Hazardous Materials 156(1-3): 365-373.13. Zhang, H., P. J. He and L. M. Shao (2008). "Flow analysis of heavy metals in MSW incinerators for investigating contamination of hazardous components." Environmental Science and Technology 42(16): 6211-6217.14. Zhang, H., P. J. He and L. M. Shao (2008). "Implication of heavy metals distribution for a municipal solid waste management system - a case study in Shanghai." Science of the Total Environment 402(2-3): 257-267.15. Zhang, H., P. J. He, L. M. Shao and D. J. Lee (2008). "Source analysis of heavy metals and arsenic in organic fractions of municipal solid waste in a mega-city (Shanghai)." Environmental Science and Technology 42(5): 1586-1593.16. Zhang, H., P. J. He, L. M. Shao and X. J. Li (2008). "Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling." Journal of Material Cycles and Waste Management 10(1): 7-13.17. Zhang, H., S. Yu, L. Shao and P. He (2019). "Estimating source strengths of HCl and SO2 emissions in the flue gas from waste incineration." Journal of Environmental Sciences 75: 370-377.18. Zhu, Y., H. Zhang, L. Shao and P. He (2015). "Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques." Journal of Environmental Sciences 27: 298-308.
4. 毕业设计（论文）计划
起讫日期 设计（论文）各阶段工作内容 2021.01.08-2021.01.14 任务书，选题审批表 2021.01.15-2021.02.28 文献综述、外文翻译 2021.03.01-2021.05.01 实验研究，模拟，表征，数据处理 2021.05.02-2021.05.31 论文写作 2021.06.01-2021.06.02 毕业论文等相应文件打印及装订 2021.06.03-2021.06.10 制作PPT，准备答辩
以上是毕业论文任务书，课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找。
